This FlowStop HP6 pump allows you to inflate more quickly without straining your inflatable FlowStop flood protection devices. That's 30% less time compared to a standard model for 15 PSI of pressure. This pump is highly recommended for inflating devices over 2m.
Important information before buying:
Custom-Made Protection - FlowStop is a custom-made inflatable device designed to reduce the risk of damages from exterior flooding.
Non-Exchangeable & Non-Refundable - Each FlowStop is manufactured to the exact dimensions you provide. Please ensure your measurements are accurate before ordering: https://www.flowstopfloodbarrier.com/how-to
"Height & Protection Level - The Height of the FlowStop listed on your quote includes the entire device. The gasket does not extend to the top, meaning the effective flood protection level is 5 inches less than the height."
Frame Depth Requirement - To function correctly, the frame depth of the opening must be at least two-thirds of the FlowStop’s own depth.
"Surface & Frame Requirements - The surface in contact with FlowStop must be flat and textured. Surfaces too sleek like aluminium or painted wood needs anti-skid tapes. If any, Grouts or ledges must not exceed 1/3 of an inch. * Frame walls must be parallel for a proper seal."
Width of your FlowStop - Your flowstops will arrive wider than listed on this invoice. Up to 2 inches wider. This is by design and will ensure maximum efficiency.
Not a Hurricane Shutter Replacement - FlowStop is designed for flood protection and should not be used as a substitute for hurricane shutters.
